EE Only Feature
While we strive for perfection with every release of Liferay Portal, the reality of the human condition dictates that releases of the product may not be as perfect as originally intended. But we’ve planned for that. Included with every Liferay bundle is a patching tool that can handle the installation of two types of patches: hot fixes and fix packs.
A hot fix is provided to a customer when a customer contacts Liferay about an issue, and Liferay’s support team–working with the customer–determines that the problem is indeed an issue with the product that needs to be fixed. Support fixes the bug and provides a hot fix to the customer immediately. This is a short-term fix that solves the issue for the customer as quickly as possible.
On a regular schedule, these hot fixes are bundled together into fix packs. Fix packs are provided to all of Liferay’s customers and are component-based. This means any issues with the content management system will be bundled together separately from issues with another component, such as the message boards. This lets you determine which patches are critical and which are not, based on your usage. Of course, if Liferay issues a security advisory, that’s something you’re always going to want to patch.
Now that you know what patching is all about, let’s check out the tool.
Installing the patching tool
If you’re using a Liferay bundle, congratulations! The patching tool is already installed. Your job isn’t done yet, however, because Liferay might have updated the patching tool. Always check the Customer Portal to see if the patching tool has been updated first. But even if you forget to check, the patching tool will tell you if it needs to be updated when you run it. A lot of planning and forethought has gone into the patching system to make it run as smoothly as possible.
You follow the same procedure whether you’re installing or upgrading the patching tool. Once you’ve obtained it from the customer portal, unzip it to the Liferay Home folder. This is the folder where you’ve placed your
portal-ext.properties file and where by default the
data folder resides. This is generally one folder up from where your application server is installed, but some application servers are different. If you don’t know where Liferay Home is on your system, check chapter 14 to see where this folder is for your specific application server.
If you’re upgrading the patching tool, all you need to do is unzip the new version on top of the old version. Note that if you’re doing this on LUM (Linux, Unix, Mac) machines, you’ll need to make the
patching-tool.sh script executable.
After the patching tool is installed, you need to let it auto-discover your Liferay installation. Then it will determine what your release level is and what your application server environment is. This is a simple command to run on LUM:
or on Windows:
From here on, for brevity we’ll use the LUM version of the command. Why? Because Liferay is open source; there’s no open source variant of Windows (ReactOS is still in alpha, so it doesn’t count); and therefore my (RS) unscientific impression is that more people will run Liferay on open source technology than not. If I’m wrong, I’m wrong, but there are still many other examples of documentation that defaults to Windows, so we still get to be different.
If you’ve installed the patching tool in a non-standard location, you’ll have to give this command another parameter to point it to your Liferay installation. For example, if you’ve installed a Liferay/Tomcat bundle in
/opt/Liferay, you’d issue this command:
./patching-tool.sh auto-discovery /opt/Liferay/tomcat-7.0.21
In all, this is pretty simple. Now let’s see how to use the patching tool to get your patches installed.
The absolute first thing you must do when installing one or more patches is to shut down your server. On Windows operating systems, files that are in use are locked by the OS, and won’t be patched. On LUM systems, you can generally replace files that are running, but of course that still leaves the old ones loaded in memory. So your best bet is to shut down the application server that’s running Liferay before you install a patch.
Liferay distributes patches as
.zip files, whether they are hot fixes or fix packs. When you receive one, either via a LESA ticket (hot fix) or through downloading a fix pack from the customer portal, you’ll need to place it in the
patches folder, which is inside the patching tool’s home folder. Once you’ve done that, it’s a simple matter to install it. First, execute
This shows you a list of patches you’ve already installed, along with a list of patches that can be installed, from what’s in the
patches folder. To install the available patches, issue the following command:
Liferay copies files into the plugins in deployment time. If these files are patched in the portal, they need to be updated in the plugins as well. In these cases, the patching tool notifies you about the change. You can run the following command to update these files automatically:
If you do not wish to have the patching tool update the plugins, it’s enough to re-deploy them. If there are new indexes created by the patch, the patching tool notifies you to update them. To get the list, run this command:
As there’s no database connection at patching time, the patches needed to be created at portal startup. In order to get the indexes automatically created, add the following line to the
portal-ext.properties file if the server has permissions to modify the indexes on the database:
Otherwise, you have to create the indexes manually. Check the output of the
./patching-tool index-info command for more details.
Once your patches have been installed, you can verify them by using the
./patching-tool.sh info command, which now shows your patch in the list of installed patches. Next, let’s look now at how to manage your patches.
Handling hot fixes and patches
As stated above, hot fixes are short term fixes provided as quickly as possible and fix packs are larger bundles of hot fixes provided to all customers at regular intervals. If you already have a hot fix installed, and the fix pack which contains that hot fix is released, you can rest assured the patching tool will manage this for you. Fix packs always supersede hot fixes, so when you install your fix pack, the hot fix that it already contains is uninstalled, and the fix pack version is installed in its place.
Sometimes there can be a fix to a fix pack. This is also handled automatically. If a new version of a fix pack is released, you can use the patching tool to install it. The patching tool uninstalls the old fix pack and installs the new version in its place.
Fix pack dependencies
Some fix packs require other fix packs to be installed first. If you attempt to install a fix pack that depends on another fix pack, the patching tool will notify you of this so you can go to the customer portal and obtain the fix pack dependency. Once all the necessary fix packs are available in the
patches folder, the patching tool will install them.
The patching tool can also remove patches.
Removing or reverting patches
Have you noticed that the patching tool only seems to have an
install command? This is because patches are managed not by the command, but by what appears in the
patches folder. You manage the patches you have installed by adding or removing patches from this folder. If you currently have a patch installed and you don’t want it installed, remove it from the
patches folder. Then run the
./patching-tool.sh install command, and the patch is removed.
If you want to remove all patches you’ve installed, use the
./patching-tool.sh revert command. This removes all patches from your installation.
What we’ve described so far is the simplest way to use the patching tool, but you can also use the patching tool in the most complex, multi-VM, clustered environments. This is done by using profiles.
Using profiles with the patching tool
When you ran the auto-discovery task after installing the patching tool, it created a default profile that points to the application server it discovered. This is the easiest way to use the patching tool, and is great for smaller, single server installations. But we realize many Liferay installations are sized accordingly to serve millions of pages per day, and the patching tool has been designed for this as well. So if you’re running a small, medium, or large cluster of Liferay machines, you can use the patching tool to manage all of them using profiles.
The auto-discovery task creates a properties file called
default.properties. This file contains the detected configuration for your application server. But you’re not limited to only one server which the tool can detect. You can have it auto-discover other runtimes, or you can manually create new profiles yourself.
To have the patching tool auto-discover other runtimes, you’ll need to use a few more command line parameters:
./patching-tool.sh [name of profile] auto-discovery [path/to/runtime]
This will run the same discovery process, but on a path you choose, and the profile information will go into a
[your profile name].properties file.
Alternatively, you can manually create your profiles. Using a text editor, create a
[profile name].properties file in the same folder as the patching tool script. You can place the following properties in the file:
patching.mode: This can be
binary (the default) or
source, if you’re patching the source tree you’re working with. Liferay patches contain both binary and source patches. If your development team is extending Liferay, you’ll want to provide the patches you install to your development team so they can patch their source tree.
patches.folder: Specify the location where you’ll copy your patches. By default, this is
war.path: No, no one’s angry. This is a property for which you specify the location of the Liferay installation inside your application server. Alternatively, you can specify a .war file here, and you’ll be able to patch a Liferay .war for installation to your application server.
global.lib.path: Specify the location where .jar files on the global classpath are stored. If you’re not sure, search for your
portal-service.jar file; it’s on the global classpath. This property is only valid if your
source.path: Specify the location of your Liferay source tree. This property is only valid if your
You can have as many profiles as you want, and use the same patching tool to patch all of them. This helps to keep all your installations in sync.
Now that you know how to patch an existing installation of Liferay, let’s turn to how you’d upgrade Liferay from an older release to the current release.